10
[OK] – Select Use the OK button, select the satellite to be received – a
star symbol will show, which satellite is selected.
Edit Using the red button you can change the name of the
satellite, and also set the longitude and direction of E-east
and W - West. Enter values using the numeric buttons on
the remote control. Use colorful buttons for appropriate
action. Red changes case, green removes characters, yellow
conrm changes and blue cancel them.
Add Using the green button, you can add a satellite. Edit it in the
same way as described in the section above - Edit.
Delete With the blue button, you can delete a satellite from the
list. Removal of the satellites will delete access to the
transponders and the channels. A message on the screen
will warn you about that. If you really want to delete the
satellite, highlight „Yes” and press OK.
To Next Page
Loading...
