34
Resolution With / switch between the values from 480i to 1080p.
Apply a resolution that ts your TV.
Format Use this feature to select the aspect ratio and the prefer-
red method of conversion. Available options are: Auto
(automatic detection of aspect ratio), 4: 3 PS (widescreen
image shows the full 16: 9 to 4: 3 TV), 4: 3 LB (black bars
on top and below the picture) and 16: 9 (use this setting
for TVs 16: 9).
Exit Video Use this function to select how to connect to a TV. Select
CVBS or RGB.
Digital Audio
Output
Choose between PCM and Bitstream. If the connected
audio device does not have a Dolby Digital decoder, set
this to PCM, otherwise the Bitstream.
After making the changes, you will be asked to conrm them. Select YES if
you want to use them, or NO to discard them.
Display Settings
In this menu, you can adjust the display settings of the receiver, such as bri-
ghtness, contrast, saturation, hue and sharpness. To change the value, select
it using / and use / to adapt it to your needs.
Time settings
In this menu, you can set your region and time zone. Select Settings Time
with / and press OK.
Region With / select your region.
GMT Usage Set region, User or O.
GMT Zone This function allows you to select the time zone and is
only available when GMT Usage is enabled. The range
is from GMT -11: 30 - 12: 00 and is increased by half an
hour. Cities located in the zone are displayed at the
bottom of the screen.
To Next Page
Loading...
