Opticum XS65 - 3.11 Time Shift

27
Operation
Recording
To make recording possible, connect the USB drive to the receiver. The recor-
ding time depends on the size of the USB memory. In a viewing mode, recor-
ding directly from the remote control can be turned on by pressing
•
REC.
The receiver will ask „Do you want to stop the recording at the end of the
program?” With the EPG the receiver knows when the scheduled program
ends and can stop the recording. Select Yes if you want the receiver to end
recording at the right time or not, if you want to decide when to stop it. To
stop the recording, press the STOP button and conrm it selecting Yes.
During recording, you can do the following:
• Press (PAUSE) to stop the program. The receiver will continue to record
the rest of the program.
• Press (PLAY) to play the program after a pause.
• Press (STOP) to stop recording.
• Press (REW) / (FF) to rewind and play fast forward.
• Use the (SKIP–) / (SKIP+) to go back and forward by a set amount
of time.
• Use the (SLOW) to slow down the playback of the program.
3.11 Time Shift
Time Shift allows you to stop playing the current program and resume it
later. When using the time shift function, you can not change the channel. To
do this, you must stop the function using the button (STOP). During recor-
dind this function is unavailable.
• Press (PAUSE) in viewing mode to start the time shift function.
• Press (PLAY) to resume the program.
• Press (STOP) to return to the playback of the current live program.
• Use the (REW) / (FF) to rewind and play fast forward.
• Use the (SKIP–) / (SKIP+) to go back and forward by a set amount
of time.
• Press (SLOW) to slow down the playback of the program.
3.12 Status
To view information about the receiver, its software and its current opera-
tion, press the STATUS (blue button).