47
Safety precautions
Aachments: Never add any aachments and/or equipment without the
manufacturer consent; as such addions may result in the risk of re,
electric shock, or other personal injury.
Locang: Slots and openings in the cabinet are provided for venlaon to
protect it from overheang. Do not block these openings or allow them to
be blocked by placing the receiver on a bed, sofa, or other similar surface,
nor should it be placed over a radiator or heat register.
Power-Cord Protecon: Place the power-supply cord out of the way, where
it will not be walked on. Please take special aenons to cords at plugs,
convenience receptacles, and the point where they exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this receiver
through openings, as they may touch dangerous voltage points or short-out
parts that could result in a re or electric shock. Never spill any liquid on
the receiver.
Note: Moisture may be formed on the lens when the unit is suddenly moved
from a cold environment or an air-condion room to a warm place or
immediately aer a heater has been turned on or in a steamy or very humid
room. If the moisture forms inside the unit, it may not operate properly. To
correct this problem, turn on the power and wait about two hours for the
moisture to evaporate.
Parts Replacement: When the unit parts need to be replaced, user should
make sure the service technician use the replacement parts specied by
the manufacturer or having the same characteriscs as the original part.
Unauthorized replacement may put the unit In the risk of re, electric shock
or other hazards.
Safety Check: Aer all the maintenances and repairs are done, user is
required to request the service technician to conduct the overall safety
check to ensure the machine is In the proper condion.