Optoma EX615 - Page 38

EX540/EX542/EX612/EX615/EX762/EX540I/EX542I/ES523ST/EW533ST
Condential
3-6
No Symptom Procedure
16
Forgetting
Password
(Administrator
Password)
- If you forget the Password, please do the following steps to get
the Universal Password:
(1) When you turn on the projector, the message "Enter
Security Code" appears. Please Input the "Current Security
Code 8642" by Remote Control, then press "Enter".
(2) Press "Menu" button, select "Setup", "Change Password",
then press "Enter" button. The message "Enter Security
Code" appears again, repeat step (1).
(3) The message "Enter New Security Code" appears. Input a
4-digits code (letters and/or numbers) that you dene.
(4) To conrm, key in the password again. The "Security Code
change successfully" appear on the screen.
17
3D Image Abnormal
(for EX762/EX540I/
EX542I/ES523ST/
EW533ST)
- Ensure the using 3D glasses is good and you must face the
projection.
- Ensure the signal source is 3D format.
- Ensure the 3D function of projector OSD is on and 3D sync
invert is on.
- Check main board.
(1)
(3)
(2)