Optoma EX615 - Network Firmware Upgrade Procedure

EX540/EX542/EX612/EX615/EX762/EX540I/EX542I/ES523ST/EW533ST
Condential
5-20
Section 4: Network Firmware Upgrade Procedure
(for EX542/EX615/EX540/EX762/EX540I/EX542I)
5-4-1 Equipment Needed
Software:
- EX542_LAN Module FW_xxx.bin (*.bin)
Hardware:
- Projector
- Power Cord: 42.50115G001
- LAN Cable
- PC
Note:The Network FW Upgrade Procedure for EX615/EX542/EX540/EX762/EX540I/EX542I is the
same,we take EX542 as an example here.