Optoma EX615 - Manley USB Driver Upgrade Procedure

EX540/EX542/EX612/EX615/EX762/EX540I/EX542I/ES523ST/EW533ST
Condential
5-16
(1)
(3)
(2)
VGA-1 Port
5-3-3 Manley USB Driver
Upgrade Procedure
1. Set up
- Plug in the power cord, the power
LED will light on red.
- Connect VGA-1 Port of projector with
NLINK Fixture.
- Connect NLINK Fixture with PC by
USB cable.
2. Execute Program
(1) "Found New Hardware Wiszard" picture
will appear on the screen.
(2) Select "Install from a list or specic
location (Advanced)".
(3) Click "Next".
(4) Select "Include this location in the
search", then click "Browse".
(5) "Browse For Folder" picture will appear
on the screen.
(6) Select "TPRP1" folder in the "Manley
USB Driver_N-Link" folder, then click
"OK".
(4)
(6)
(5)