Oracle Database Appliance X6-2S/X6-2M/X6-2L Front and Back Panels
Chapter2 • Overview of Oracle Database Appliance 21
Callout Description Callout Description
1 Power Supply (PS) 0 with fan module 9 NET MGT port. Service processor
10/100/1000Base-T network interface port
with RJ-45 connector used to connect to
Oracle Integrated Lights Out Manager
(ILOM)
Caution - The management ports are
intended for use by service engineers only.
2 Power Supply (PS) 0 status indicators:
Service Required LED: amber, AC OK LED:
green
10 SER MGT port. Service processor RJ-45
serial port used to connect to Oracle ILOM
Caution - The management ports are
intended for use by service engineers only.
3 Power Supply (PS) 1 with fan module 11 10 GbE network interface port with RJ-45
connector
Note - Ethernet ports NET 2 and NET 3 are
nonfunctional in Oracle Database Appliance
X6-2S.
4 Power Supply (PS) 1 status indicators:
Service Required LED: amber, AC OK LED:
green
12 10 GbE network interface port with RJ-45
connector
Note - Ethernet ports NET 2 and NET 3 are
nonfunctional in Oracle Database Appliance
X6-2S.
5 System status indicators: Locate LED: white,
Service Required LED: amber, Power/OK
LED: green
13 10 GbE network interface port with RJ-45
connector
6 PCIe card slot 1: empty 14 10 GbE network interface port with RJ-45
connector
7 PCIe card slot 2: NVMe Switch PCIe Card 15 USB 2.0 connectors (2)
8 PCIe card slot 3. Dual 10 GbE SFP+ PCIe
2.0 Low Profile Adapter. Provides two 10
GbE dual-rate SFP+ ports.
PCIe card slot 4 (internal). Dual-port Internal
12Gb/s SAS3 host bus adapter. Provides
support for the server's internal SAS storage.
16 DB-15 video connector
Oracle Database Appliance X6-2L Front Panel
The Oracle Database Appliance X6-2L server occupies 2RU.
The following figure shows the components on the front panel of an Oracle Database
Appliance X6-2L.
To Next Page
Loading...
Need help?
General