Oracle SPARC T8-1 Installation Guide

Server Overview
Step Description Links
“Rear Panel Components” on page 13
5. Take safety and ESD precautions and assemble the required
tools.
“Handling Precautions” on page 17
“ESD Precautions” on page 17
“Tools Needed for Installation” on page 18
6. Install any optional components into the server. “Optional Components” on page 25
7. Install the server into a rack. “Installing the Server” on page 25
8. Attach data and management cables to the server. “Connect Cables” on page 51
9. Connect the power cords to the server, configure the Oracle
ILOM on the SP, power on the server for the first time, and set
up the operating system.
“Powering On the Server for the First Time” on page 51
Related Information
■
SPARC T8 Series Servers Product Notes
■
SPARC T8-1 Server Safety and Compliance Guide
■
SPARC T8 Series Servers Administration Guide
■
SPARC T8-1 Server Service Manual
Server Overview
This topic provides a high-level introduction to the main components and capabilities of the
server.
10 SPARC T8-1 Server Installation Guide • June 2019

Oracle SPARC T8-1 Specifications

General

Brand	Oracle
Model	SPARC T8-1
Category	Server
Language	English