Tools Needed for Installation
Caution - Electrostatic discharge can permanently disable the server or require repair by service
techniciens. To protect electronic components from electrostatic damage, place components
on an antistatic surface, such as an antistatic discharge mat, an antistatic bag, or a disposable
antistatic mat. Wear an antistatic grounding strap connected to a metal surface on the chassis
when you work on server components.
Related Information
■
“Handling Precautions” on page 17
Tools Needed for Installation
■
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
In addition, you must provide a system console device, such as one of the following:
■
ASCII terminal
■
Workstation
■
Terminal server
■
Patch panel connected to a terminal server
Related Information
■
“Handling Precautions” on page 17
■
“ESD Precautions” on page 17
■
SPARC T8-1 Server Service Manual
18 SPARC T8-1 Server Installation Guide • June 2019
To Next Page
Loading...
