Secure Cables to the CMA
Related Information
■
“Rear Panel Components” on page 13
■
“Connect Cables” on page 51
Secure Cables to the CMA
After connecting the server cables, secure them to the CMA if a CMA was installed.
1.
Attach the CMA to the server in the rack.
See “Prepare the CMA for Installation” on page 38 and “Attach the CMA to the
Server” on page 41.
2.
Open the cable covers and straps on the CMA.
3.
Route the server cables through the CMA cable covers and straps.
60 SPARC T8-1 Server Installation Guide • June 2019
To Next Page
Loading...
Need help?
General