Oracle SPARC T8-1 Installation Guide

Handling Precautions
Handling Precautions
Caution - Deploy the antitilt bar on the equipment rack before beginning an installation.
Caution - The server weighs approximately 60 lb (27.22 kg). Two people are required to lift
and mount this 2U server into a rack enclosure when using the procedures in this document.
Caution - When completing a two-person procedure, always communicate your intentions
clearly before, during, and after each step to minimize confusion.
Related Information
■
“Physical Specifications” on page 19
■
“Installing the Server” on page 25
■
SPARC T8-1 Server Getting Started Guide
ESD Precautions
Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wrist strap, foot strap, or equivalent safety equipment to prevent electrostatic damage when you
install or service the servers.
Preparing for Installation 17

Oracle SPARC T8-1 Specifications

General

Brand	Oracle
Model	SPARC T8-1
Category	Server
Language	English