Identifying Ports
Pin Signal Description Pin Signal Description
1 Transmit Data + 5 No Connect
2 Transmit Data – 6 Receive Data –
3 Receive Data + 7 No Connect
4 No Connect 8 No Connect
Gigabit Ethernet Ports
Four RJ-45 Ethernet ports (NET 0, NET 1, NET 2, NET 3) can be accessed from the rear panel.
See “Rear Panel Components” on page 13. The Ethernet interfaces operate at 100 Mbps, 1000
Mbps, and 10000 Mbps.
Pin Signal Description Pin Signal Description
1 Transmit/Receive Data 0 + 5 Transmit/Receive Data 2 –
2 Transmit/Receive Data 0 – 6 Transmit/Receive Data 1 –
3 Transmit/Receive Data 1 + 7 Transmit/Receive Data 3 +
4 Transmit/Receive Data 2 + 8 Transmit/Receive Data 3 –
Powering On the Server for the First Time 57
To Next Page
Loading...
