Shipping Kit
No. Description
1. Server
2. Cable management arm (CMA)
3. Rackmount kit
4. Antistatic wrist strap
5. RJ-45 to DB-9 crossover adaptor
6. Printed documents
7. 2 AC power cords
Note - The shipping kit might also contain PCIe fillers that were removed from the server when
PCIe cards were installed in the factory. Save these PCIe fillers and use them to cover PCIe
slots when cards are removed from the server.
Related Information
■
“Server Overview” on page 10
■
“Preparing for Installation” on page 15
16 SPARC T8-1 Server Installation Guide • June 2019
To Next Page
Loading...
