Contents viii
▼ Avoid Booting the Solaris Operating System at Startup 60
▼ Reset the System 60
▼ Power Cycle the System 61
Verifying System Functionality 62
Updating the Firmware 63
flashupdate command 63
▼ Update the Firmware 64
Selecting a Boot Device 67
Boot Device Selection Overview 67
▼ Select a Boot Device 68
Installing the Servers With the Express Rail Rackmounting Kit 69
Slide Rail Assembly Notes for the Express Rail Rackmounting Kit 69
▼ Install the Slide Rail Assemblies 72
▼ Insert and Lock the Server in the Rack 77
Dismounting the Server 79
Assembling and Installing DC Power Cables for the Sun SPARC Enterprise
T5140 Server 81
Requirements for Servers With DC Input Power 81
DC Supply and Ground Conductor Requirements 82
Overcurrent Protection Requirements 83
Assembling and Installing the DC Input Power Cables 83
▼ Assemble the DC Input Power Cable 83
▼ Install the Strain Relief Housings 89
▼ Connect the DC Input Power Cords to the Server 91
Assembling and Installing DC Power Cables for the Sun SPARC Enterprise
T5240 Server 93
Requirements for Servers With DC Input Power 93
To Next Page
Loading...
Need help?
General