Hardware Overviews
■
Serial Management Port - The serial management connector (SER MGT) is an RJ-45 port
and provides a terminal connection to the service processor (SP) console.
■
HBA Ports - The 4x4 SAS-2 HBA, installed in PCIe slot 2 of the ZS3-2, provides
connectivity to external DE2 and Sun Disk Shelves. The HBA ports are numbered 0-3, left
to right, as shown below:
Optional Cable Management Arm
The following figure identifies the components of the second-generation cable management arm
(CMA). See the CMA installation instructions.
Installation Prerequisites and Hardware Overviews 43
To Next Page
Loading...
