Perform Compass Offset Setup Procedure
7-14 Ocean TRx™ 4500 Installation and Operations Manual
Setting the antenna to Peak Mode (see Section 8.1.5 Peak Mode on page 8-4)
and calculating the difference between the resulting azimuth and the nominal
azimuth.
6. Calculate the degree to which the original ‘naked-eye’ estimation of the compass
offset angle must be corrected in order to reach the accurate zero setting:
7. Configure the accurate offset value:
From the Config menu, select Compass.
Enter the correct compass offset in the Offset field.
Click OK and then click [V] on the keyboard and press Enter to save.
To Next Page