© Orbotech 2005 Symbion™ Programmer Guide 21
Draft - Confidential
Inspection Recipe Creation
Overview
For the creation of new Inspection Recipes a Wizard is provided, when
successfully completed the Inspection Recipe is ready for fine tuning with a
small quantity of boards prior to use in Production Inspection.
The Wizard may be run on either a machine or an Offline Programming
Station.
To create a new Inspection Recipe you will need the following;
• A Symbion S-36 System or Offline Station
• Component Data for the product
Optionally;
• An example of the product after the SMT line
• An unpopulated board
• Additional Data (Multiboard, BOM)
To Next Page
Loading...