26 Symbion™ Programmer Guide © Orbotech 2005
Draft - Confidential
CAD Import
The manufacturing data of the product is now imported into the empty
Inspection Recipe.
The system supports the following data;
• ASCII text
• Placement Data, one component per line including placement data,
reference designator and package/part information
• Multiboard Data, describing the orientation and relative position of
Miniboards
• Bill of Materials, one part number per line with corresponding package
information
To import data first a Profile must first be selected or a new one created.
The Profile describes the data format to the system, in order to import the
CAD Data successfully.
If you use a consistent format for manufacturing data only one
CAD profile will be necessary. If you receive data from many
sources, in many formats, it may be necessary to create a new
profile on each occasion
To Next Page
Loading...