Osram BT Series User Manual

OSRAM BT Control | Configuration of multiple devices
19
4.2 Three steps for luminaire production with BT Control products
1 Configure the reference luminaire
and save the profile.
4.2.1 Step 1: Commissioning of a reference luminaire
2 Upload the profile to multiple BT
Control devices.
3 Assemble the luminaires and perform
all necessary function tests without the
need of an app.
The reference luminaire must be equipped
with an OSRAM BT Control product and the
OSRAM BT Config App.
1 Connect the reference luminaire to the controller via
Bluetooth.
2 Adapt the settings of the controller (actual configuration).
3 Adapt the pushbutton profiles.
4 Enable grouping (if needed).
5 Adapt the individual settings for each group (light regulation
on/off, offset, switch-on level, scenes etc.).
6 Adapt the input device profiles.
7 Perform a light regulation calibration if light regulation is
enabled.
8 Save all settings as a new profile.

Osram BT Series Specifications

General

Brand	Osram
Model	BT Series
Category	Control Systems
Language	English