Osram BT Series - Luminaire Assembly in Production

OSRAM BT Control | Configuration of multiple devices
22
4.2.3 Step 3: Assembly of the luminaire in production
Just like other luminaire components, the pre-configured controller can be assembled without the need of a
smart device for configuration during production.
Benefits for luminaires with integrated BT Control device
— After assembling the luminaire, all functional and safety tests can be performed without the need of a smart device.
— No additional configuration step needed. This saves a lot of time and effort.
Benefits for luminaires with two groups (direct/indirect light): DALI ECO BT RTC
— Group addresses of DALI LED drivers can be pre-programmed, e.g. OSRAM DALI drivers can be programmed via
Tuner4TRONIC (T4T) software.
— Internal pushbutton configuration already uploaded during step 2.
— After assembling the luminaire, all functional and safety tests can be performed without the need of a smart device
(separate switching of direct/indirect light).
— The luminaire can be packed directly into the shipping box. This saves a lot of time and effort.