Name: Osram BT Series
Brand: Osram
Rating: 4 (1 reviews)

To Next Page

To Previous Page

OSRAM BT Control | Conﬁguration of multiple devices

4.2.2 Step 2: Upload the conﬁguration to multiple BT Control products

1 Open the app and select

“Conﬁgure multiple devices”

in the menu.

Please note:

— This feature is only visible in the

Expert mode

— To enable the Expert mode, open

“Settings” and “Proﬁle”.

Please enter the following:

Name: ExpertUser

Company: OSRAM

2 Select available devices that

shall be conﬁgured.

Please note:

— T

he app will be scanning for BT Control

products via Bluetooth interface and

will enable a one-to-one Bluetooth

connection to download the infor-

mation from each device.

— A device can be selected if the app

has access to the controller.

— Factory-new devices have a

120-minute timer after power-up,

before the access is blocked, as

long as no password is set. The re-

maining time is displayed next

to the device (3).

— If a device is password-protected

and the password is stored in the

app, it can be selected.

— If a device is locked via password

(with another smart device), it must

be unlocked by entering the pass-

word before it can be conﬁgured.

Important note:

After powering up the controller, it can be conﬁgured with

the BT Conﬁg App for two hours only (as long as no

admin password is stored). After the two-hour delay

time has expired, connecting to the controller with the BT

Conﬁg App is blocked. The timer can be reset by pow-

er-cycling the controller. When an admin password is set,

the access to the controller will no longer expire.

Enable the actions that shall be

performed

1 Update ﬁrmware:

— Always enable this feature to ensure

that the latest ﬁrmware is uploaded

to the device.

2 Reset to factory new:

— Only enable if you want to reset the

conﬁguration to “factory new”.

3 Synchronize RTC:

— Only valid for the DALI ECO BT RTC.

If enabled, the date and time will be

synchronized with the controller.

— If Human Centric Lighting (HCL) is

enabled in the proﬁle (default), the

controller will use the brightness

level and color temperature of the

HCL proﬁle when switched on.

4 Password:

— An admin and a user password can

be set to limit the access to the

controller via OSRAM BT Conﬁg

App or OSRAM BT Control App.

— When an admin password is set,

the 120-minute timer for access to

the controller via OSRAM BT Conﬁg

App is disabled.

5 Proﬁle upload

— Any proﬁle stored in the app can be

uploaded to the device.

The proﬁle includes:

— All settings included in the current

conﬁguration menu

— Active proﬁle of the integrated

pushbutton

— Setpoint for light regulation (if active

and stored when the proﬁle was saved)

Please note: The controller will

perform a calibration of the ﬁrst

setpoint for light regulation if active

and stored.

Not stored in the proﬁle:

Information of connected input devices

(sensors, pushbutton couplers)

Important notes:

— Up to 10 BT Control devices can be conﬁgured in series.

— The devices can be powered via mains or alternatively via DALI.

— The progress of the conﬁguration upload will be logged in the app.

Conﬁguration status indicated via LED:

— Blue LED on: Smart device connected to the device (uploading)

— Blue LED ﬂashing slowly (1 Hz): Upload successful

— Blue LED ﬂashing quickly (2 Hz): Upload failed

Brand	Osram
Model	BT Series
Category	Control Systems
Language	English

Osram BT Series User Manual

Table of Contents

Questions and Answers:

Osram BT Series Specifications