Osram BT Series - Open-Plan Office Including Swarm Function and Zone Division

OSRAM BT Control | Applications and settings
54
Solution with DALI ECO BT
8 x floor-standing DALI luminaire
DALI luminaire with integrated
DALI ECO BT Control device
and DALI LS/PD LI sensor
4 x standard DALI luminaire
1 x DALI ECO BT
2 x DALI PRO PB coupler
2 x DALI LS/PD CI
Light and presence detector for ceiling integration
5.2.7 Open-plan office including Swarm function and zone division
5.2.7.1 Requirements
The open-plan office luminaires are floor-standing luminaires
in the desk area and downlights in the corridor area. They
are divided into five light zones.
The lights will be switched on automatically when a person
enters a respective zone, while luminaires in linked zones
will go to a pre-defined standby level. If no presence is de-
tected anymore, the light will be dimmed down to standby
level after a 15-minute delay time.
During presence, the daylight harvesting function will dim
the artificial light up and down according to the amount of
daylight available.
5.2.7.2 Application setup and wiring diagram
c) Wiring diagram of floor-standing luminaires shown in zones 1-4
DALI LS/PD LI
DA
DA
L
N
Pe
DALI LED driver
(direct light)
L
N
Pe
DA
DA
DALI ECO BT
L
N
PB
PB
DA
DA
DALI LED driver
(indirect light)
L
N
Pe
DA
DA
Zone 5
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 1
Zone 2
Zone 3
Zone 4