10 The ECU returned invalid code.
Please reset the ECU. OK Diagnosis When the ECU returned invalid
code.
11 Push the stop button, and try again. OK Graph View When you click the
Active Test Running button to Switch Screen
Data Recording while each process of
Screens is running.
12 This version does not OK The language When you select except
support this language. English.
13 Cannot connect to the ECU! OK The transfer The application cannot
connect to the ECU with
the setting when you
click the back button.
14 Would you like to clear YESNO Diagnosis When you click the
all historic errors? History Clear button.
15 Cannot clear historic errors. OK Diagnosis The application failed to clear
the ‘Historic Error’.
16 The recording error occurred. OK Data Recording The application failed to
record data.
17 The recording was nished. OK Data Recording The recording was
nished normally.
18 Cannot open the recording le. OK Data Recording The application cannot
open the recording le.
19 Have you set a throttle buttery
to the metal touch position?
Is the range of the current voltage normal? YESNO Throttle Setting When you click the Set
to ECUbutton.
20 Setting is succeeded. OK Throttle Setting When the ECU returned
normal code.
21 TPS voltage is out of range. OK Throttle Setting When the ECU returned
this error code.
22 TPS Sensor Error. OK Throttle Setting When the ECU returned
this error code.
23 TPS Sensor Power Error. OK Throttle Setting When the ECU returned
this error code.
24 Engine is running. OK Throttle Setting When the ECU returned
this error code.
25 Out of Battery. OK Throttle Setting When the ECU returned
this error code.
26 There is no software in the ECU. OK Throttle Setting When the ECU returned
this error code.
27 Unexpected error occurred. OK Throttle Setting When the ECU returned
this error code.
28 This function is not supported by the ECU. OK Throttle Setting When the ECU returned
Operating time this error code.
KSCAN
To Next Page
