58
ELECTRICAL PARTS
Step 1
Click the icon “Ajuste de la
aceleracion”
5. Adjustment of Idle Position: Execute the [Kscan] software.
6. IMPORTANT!!! In order to ensure correct updating of the ECU, please restart the Battery voltage
before starting the engine. If not updates will not be saved.
Step 2
With the thottle on the base
position (idle
position) click “Set de ECU”
Step 3
Click “Yes” to conrm.
Step 4
The adjustment ot the idle
position is done.
Click “Ok”.
To Next Page
