Outback MATE - Page 110

110
STATUS/DC/SHUNT C
max removed
amps 0.4
DOWN UP RESET TOP
STATUS/DC/SHUNT C
max removed
kWatts 0.000
DOWN UP RESET TOP
STATUS/DC/SHUNT C
max charged
amps 721.6
DOWN UP RESET TOP
STATUS/DC/SHUNT C
max charged
kWatts 0.030
DOWN UP RESET TOP
BATTERY
STATUS/DC BATT----------
total days at 100%
0.7
DOWN UP RESET TOP
STATUS/DC BATT----------
days since charge
parameters met 0.0
DOWN UP TOP
STATUS/DC/SHUNT
end of shunt
status menu
UP TOP STATUS
STATUS--------------
choose device:
FX CC DC MAIN
STATUS/DC/PAGE 1--------
STATS
METER SHUNT BATT PG2
MAIN-------------------------
6:54:42PM
SUM STATUS SETUP ADV
STATUS/DC BATT----------
battery min today
.0 vdc
DOWN UP RESET TOP
STATUS/DC BATT----------
battery max today
45.1 vdc
DOWN UP RESET TOP
STATUS/DC BATT----------
temp comp’d batt
setpoint 28.7 vdc
DOWN UP TOP
STATUS/DC BATT----------
sytesm battery
temperature 23 C
DOWN UP TOP
STATUS/DC BATT----------
lifetime kAH removed
0
DOWN UP RESET TOP
STATUS/DC BATT----------
cycle kWhr charge
eciency 100%
DOWN UP TOP
STATUS/DC BATT----------
cycle charge
factor 100%
DOWN UP TOP
STATUS/DC BATT----------
end of battery
status menu
UP TOP STATUS
SETUP
STATUS--------------
choose device:
FX CC DC MAIN
MAIN-------------------------
6:54:42PM
SUM STATUS SETUP ADV
SETUP/FX/SEARCH--P00
search 2 cycles
pulse length
DOWN INC DEC PORT
SETUP/FX/SEARCH--P00
search 30 cycles
pulse spacing
DOWN INC DEC PORT
SETUP/FX/SEARCH--P00
search 0
sensitivity
DOWN INC DEC PORT
SEARCH
SETUP/FX------------
choose category:
SRCH INPUT MAIN
SETUP/FX/SEARCH-----
search setup
completed
TOP SETUP MAIN
SETUP/FX------------
choose category:
SRCH INPUT MAIN
SETUP/FX/INPUT---P00
ac1/grid 60 aac
limit
DOWN INC DEC PORT
SETUP/FX/INPUT---P00
ac transfer GRID
control
DOWN GRID GEN PORT
SETUP--------------------
choose device:
FX MATE
SETUP/FX/INPUT------
input setup
completed
TOP SETUP MAIN
MAIN-------------------------
6:54:42PM
SUM STATUS SETUP ADV
SETUP/FX/INPUT---P00
ac2/gen 30 aac
limit
DOWN INC DEC PORT
MATE SETUP