Owon 4-CH VDS6000 Series User Manual

２１
Status Details List
i. following status appears when communicating the device with PC
Linking
the device is communicating with PC
Connect
the device successfully communicates with PC
Match
the PC software is matching the device as per model type
Syncing
the PC software is synchronizing the device’s settings
ii. following status reflects the communication between the device and PC
Offline
no communication between PC software and the device
USBFound
the device found
USBDrvErr
USB driver installation error appears
MachineNotSupport
the device not identifiable
iii. following status indicates the working of the device
Auto
automatic trigger mode
Ready
ready for receiving trigger
Trig'd
signal triggered
Scan
slow scan mode
Stop
the device stops acquiring signal data
Error
error occurred
ReSyncing
re-synchronize with the device
AutoSet
in process of auto setting
Keyboard Shortcuts
F5
Run/Stop
Ctrl + Enter
Auto Set
Q
1 division less from Channel 1’s voltage division
A
1 division more from Channel 1’s voltage division
W
1 division less from Channel 2’s voltage division
S
1 division more from Channel 2’s voltage division
E
1 division less from Channel 3’s voltage division
D
1 division more from Channel 3’s voltage division
R
1 division less from Channel 4’s voltage division
F
1 division more from Channel 4’s voltage division
←
1 division less from time base
→
1 division more from time base

Owon 4-CH VDS6000 Series Specifications

General

Brand	Owon
Model	4-CH VDS6000 Series
Category	Test Equipment
Language	English