SECTION 2 - PRODUCT DESCRIPTIONPACE │ Installation & Assembly Manual
Issue Date: 07/03/2018
16
Form PA102.20-N1
HEATING AND COOLING SYSTEM
Various types of heating and cooling may be applied,
which include:
• Hot water or steam coils
• Electric or fuel burner heat
• Factory mounted chilled water coils
• Direct expansion refrigerant coils
CLEANING
Various types opf cleaning include filters and UV lights.
HAND ORIENTATION
Coil connections and other components are located
and described as left or right hand. The proper orienta-
tion to describe the proper hand is when airflow is at
your back as shown in Figure 2 on page 16.
AHU IDENTIFICATION (ID)
Indoor and outdoor AHUs are labeled with the following
ID labels:
• AHU
• Skid
• Loose Components
Indoor AHUs are shrink wrapped with skid ID labels on
the outside of the wrapping and on each skid.
LD08004
Figure 2 - AHU and Coil Hand Identification
FAN SECTION
RIGHT
REAR
LEFT HAND (LH)
COIL CONNECTION
RETURN AIR
LEFT
INLET SECTION
OUTSIDE AIR
FRONT
RIGHT HAND (RH)
COIL CONNECTION
DRIVE HAND AND COIL HAND DETERMINED
BY FACING THE INLET SECTION
To Next Page
Loading...