10
Important safety information
2.3 You must take these points into account
during assembly
2.3.1 General instructions
• Observe these assembly instructions and in particular all the
safety instructions.
• Structural modifications may only be performed by PALFINGER
Tail Lifts contract workshops. Your nearest contract workshop
and other contact information can be found in the workshop
directory.
• Only use PALFINGER Tail Lifts original parts during assembly
work.
• Observe all applicable accident prevention regulations.
• Observe the vehicle manufacturer's attachment guidelines.
• Observe the respectively applicable general assembly diagram
from PALFINGER Tail Lifts.
• Observe the respectively applicable general attachment report
(attachment diagram) from PALFINGER Tail Lifts.
• Make sure that any welding work is only performed by certified
welders. It is essential to comply with the vehicle maker's
specifications as well as the applicable standards and regulations
for welding work.
2.3.2 Before starting assembly
• Before starting assembly, read the safety instructions in the
operating manual, especially the chapter "Care and
maintenance".
• Observe the vehicle manufacturer's attachment guidelines.
• Observe the additional installation instructions that were included
with the respective components (e. g. camera system).
• Place the vehicle on a level and firm surface for assembly and
align the vehicle so it is also level.
• If the vehicle has air suspension, deactivate this.
• Remove the battery terminals and ABS plugs before assembly.
To Next Page
Loading...
Need help?
General
