8
Important safety information
2 Important safety information
The PALFINGER Tail Lifts tail lift has been built according to the
state-of-the-art and to recognised safety engineering rules. Never-
theless there is a danger of personal injury and material damage if
you do not comply with the instructions in this chapter and in this op-
erating manual.
Read this operating manual thoroughly all the way through,
before mounting thePALFINGER Tail Lifts tail lift.
Keep the assembly instructions at hand in a good condition so
that they are always legible. Make sure that they are available to
all responsible fitters at all times.
Always ensure that these assembly instructions and the supplied
documents are always passed on along with the PALFINGER
Tail Lifts tail lift to third parties.
2.1 Personnel qualifications
The assembly and commissioning of the PALFINGER Tail Lifts tail
lift require systematic knowledge of mechanical, electrical, hydraulic
and pneumatic systems as well as familiarity with the associated
specialist terms. Consequently to ensure operational safety these
activities may only be executed by trained and authorised special-
ists, who have been instructed in safety engineering aspects, or by
an instructed person working under the supervision of a specialist.
A specialist is a person who, due to his specialised training, knowl-
edge, and experience, as well as knowledge of the applicable regu-
lations and guidelines, can evaluate the tasks assigned to him, rec-
ognise possible dangers, and implement suitable safety measures.
A specialist must comply with the applicable technical rules.
To Next Page
Loading...
Need help?
General
