22
Preparing vehicle
6.4 Preparing vehicles with box bodies
Mounting
the sealing system
A sealing system can be ordered from PALFINGER Tail Lifts and
pre-installed for vehicles with box bodies. The sealing system is
mounted according to the special assembly instructions supplied.
Box bodies with
doors
To avoid damage to box body doors, you must attach spacers
and bridging profiles. You must then abut the platform
to the superstructure end with the bridging profile when the doors
are open.
Prepare the spacers for the lifting mechanism area (if necessary).
Fix the spacers to the door.
Create a bridging profile (e.g. a square tube with rounded edges
60x40x3).
Mount the bridging profile over the entire loading area width.
To Next Page
Loading...
Need help?
General
