90 Section 2B: Using Your Device’s Phone Features
5. Select Camera to take a picture and add it to this contact entry (if your smart
device includes a camera), or select an existing picture for this contact
entry.
6. Select Ring tone and then select a tone for this contact entry.
Selecting Your Call Settings
1. Press Start and select Settings.
2. On the Personal tab, select Phone .
3. On the Phone tab, set any of the following
options:
䡲 Dialpad: Sets the style for the dialpad tones
(DTMF) in the Phone application.
⽧ Short tones: Tones sound briefly as you
dial.
⽧ Long tones: Tones continue to sound until you release the key.
䡲 TTY/TDD: Lets you configure your smart device for use with a TTY/TDD
device for people who are deaf or hard of hearing. (See “TTY Use With
Sprint PCS Service” on page 93 for more information.)
䡲 After calls from numbers that are not in Contacts, ask if I want to add them:
Indicates whether you are prompted to add contact entries for numbers
that are not already in your Contacts list.
4. Press OK to finish.
Tip:
If you have trouble accessing a voicemail system, try changing the
Dialpad tone setting.
To Next Page
Loading...
