Section 1A: Device Setup 13
Device Setup
Charging the Battery
The battery comes with a sufficient charge to complete the setup process and
activate your phone. After activation, we recommend charging your smartphone
for 3.5 hours (or until the indicator light is solid green) to give it a full charge. See
“Maximizing Battery Life” on page 15 for tips on maximizing the life of your
device’s battery.
1. Plug the AC charger into a wall outlet.
2. Connect the charger cable to the charger jack on the bottom of the device.
Make sure the arrow on the connector is facing up, toward your Treo device
screen.
3. To confirm that your device is charging, check the indicator light.
䡲 Solid red indicates that your device is charging.
To Next Page
Loading...
