Section 3C: Using Exchange ActiveSync 141
Exchange Server
Setting Up an Exchange Server Account
1. Press Start and select Programs.
2. Select ActiveSync .
3. Press Menu (right softkey) and select Add Server Source.
4. Enter the Server address, and then press Next (right softkey).
5. Enter your username, password, and domain. The password is case-
sensitive. (Your password can use numbers and text. Check if your Caps Lock
and Option Lock are active because that can affect the password you are
entering. See “Entering Lowercase and Uppercase Letters” on page 48 and
“Entering Numbers, Punctuation, and Symbols” on page 48.)
6. If you want to enter your password each time you access this account, do
not check the Save password box. (If you want your password entered
automatically, check this box.)
Tip:
If you already set up an Exchange Server account, Add Server Source does
not appear on the menu; Configure Server appears on the menu instead.
Tip:
The Exchange Server settings are case-sensitive. Be sure to enter
uppercase and lowercase letters properly.
To Next Page
Loading...
