28 Section 1C: Synchronizing Information—The Basics
Synchronization Methods
Use the ActiveSync software to synchronize your smart device with a computer or
with a corporate server.
Synchronizing Your Device With a Computer
To synchronize the information between your Treo700wx smart device and your
computer, install the ActiveSync desktop software and connect your device to
your computer using one of the following methods:
䢇 Connect using a USB sync cable: When you connect
your device to your computer using the sync
cable, synchronization begins automatically. (See
“Connecting Your Treo Device to Your Computer
(USB)” on page 33 and “Synchronizing With a USB
Connection” on page 35.)
䢇 Connect using Bluetooth wireless technology: You
must first set up the Bluetooth connection. (See
“Synchronizing Over a Bluetooth Connection” on
page 165.)
䢇 Connect using an Infrared (IR) technology: You must first set up your computer
to receive infrared beams. (See “Synchronizing Over an Infrared Connection”
on page 169.)
Note:
Even if you have already installed a previous version of the ActiveSync
software, you must install the software that came with your smart
device on the Getting Started CD. See “Installing the Desktop
Synchronization Software” on page 31 for instructions.
To Next Page
Loading...
