302 Section 6B: Customizing Your Smart Device
Connection Settings
Turning Wireless Services On/Off
1. Press Start and select Settings.
2. Select the Connections tab, and then select
Wireless Manager.
3. Turn your smart device’s wireless features on/off.
(Select All to turn all wireless features on/off.)
4. Press OK to finish.
You can also turn wireless services on and off by tapping the signal-strength icon
at the top of the screen and then selecting Wireless Manager.
Note:
The Wi-Fi selection appears only if a Wi-Fi card is installed in your smart
device. You must purchase and install a third-party Wi-Fi card to use this
feature.
Tip:
To change the settings for one of the displayed wireless features, press
Menu and select the wireless feature you want to change.
Tip:
Turning off the Bluetooth
®
feature may improve your Wi-Fi card
performance. To turn the Bluetooth feature off, go to your To d a y screen,
tap the Bluetooth icon, and then uncheck the Turn on Bluetooth box.
To Next Page
Loading...
