Section 6B: Customizing Your Smart Device 295
Customizing
System Settings
Setting the Date and Time
Clock & Alarms Settings lets you set the time zone, time, and date for your home
location and a location that you visit.
1. Press Start and select Settings.
2. Select the System tab, and then select Clock & Alarms .
3. On the Time tab, select Home.
4. Select the first list, and then select the time zone
for your home location.
5. Select the hour, and then press Up or Down
to increase or decrease the hour setting. (Repeat
this process for the minutes, seconds, and AM/
PM settings.)
6. (Optional) Select Visiting and set the information
for a location that you visit often.
7. Press OK .
8. If prompted, select Yes to accept your changes.
Tip:
To set the display format for the date and time, see “Setting Display
Formats” on page 282.
To Next Page
Loading...
