Palm Treo 700wx - Synchronizing with a USB Connection

Section 1C: Synchronizing Information—The Basics 35
Synchronizing Basics
Synchronizing With a USB Connection
1. Install the ActiveSync desktop synchronization software as described in
“Installing the Desktop Synchronization Software” on page 31.
2. Connect your smart device to your
computer. (You should hear the
ActiveSync
®
tone.)
3. Look for the ActiveSync icon at the top
of your smart device’s screen and the
ActiveSync icon in the taskbar on your
computer.
䡲 If you don’t see the ActiveSync icon,
make sure the desktop
synchronization software that came
with your smart device is running on
your computer.
䡲 If you have any problems synchronizing, see “Synchronization
(ActiveSync
®
Software)” on page 334 for troubleshooting suggestions.
Tip:
We recommend that you install a backup and restore application. A
backup and restore application preserves your data and settings if your
smart device is ever lost or stolen, and it protects your data during a hard
reset. See http://www.palm.com/us/support/downloads/spritebackup/
index.html
for more information.
This Button Has No
Function With Your
Treo 700wx Smart