168 Section 3E: Bluetooth/IR
Beaming a Record
1. Highlight the entry or file you want to beam.
2. Press Menu (right softkey) and select
Beam… (the menu item changes names based
on the type of item you highlighted).
3. Point the IR port on your smart device directly at
the IR port of the receiving device.
4. When the name of the receiving device appears,
select it to begin the transfer. (A red icon
indicates an IR connection.)
5. Wait for “Done” to appear next to the name of the receiving device before
you continue using your smart device.
Receiving Beamed Information
1. Turn on your screen.
2. Point your smart device’s IR port directly at the IR port of the transmitting
device.
3. When the Receiving Data message appears, select Ye s to receive the beam.
Tip:
For best results, the path between the two devices must be clear of
obstacles, and both devices kept stationary. If you have difficulty
beaming, shorten the distance and avoid bright sunlight.
The type of information you can beam depends on the type of device you
are beaming to. Windows Mobile
®
devices are always compatible with
the Treo device.
To Next Page
Loading...
