Section 6B: Customizing Your Smart Device 291
Customizing
Using Phone Lock
You can lock your smart device to prevent unauthorized use of your account.
1. Press Start and select Settings.
2. On the Personal tab, select Phone .
3. Select the Security tab and set any of the
following options:
䡲 Auto-lock: Sets whether your smart device
locks automatically and when this occurs.
䡲 Change Lock Code: Lets you assign or change
the lock code used to unlock your smart
device. (Your default lock code is the last four digits of your phone
number. If you change the lock code, select OK to accept your new code.)
4. Press OK to finish.
Tip:
When your phone is locked, you must enter a lock code to place calls,
except for emergency numbers and Sprint Customer Service (*2).
Tip:
When Phone Lock is on, you can unlock your phone by going to the To d a y
screen, entering your lock code, and then selecting Enter. You do not need
to enter your password to answer a call.
To Next Page
Loading...
