338 Section 7A: Help
5. Disable local network time. By default your smart device synchronizes the
date, time, and time zone with Sprint network whenever your phone is on
and you are inside a coverage area. You can disable this option in Clock &
Alarms Settings by selecting More, and then unchecking the Enable local
network time box. See “Setting the Date and Time” on page 295 for more
information.
You should now be able to assign time zones to your events without
encountering this problem.
My Scheduled Sync Doesn’t Work
By default, a scheduled sync does not work while you are roaming. This is to
prevent roaming charges on your account. If roaming charges are not a concern,
follow these steps to continue your sync schedule while roaming:
1. Press Start and select Programs.
2. Select ActiveSync .
3. Press Menu (right softkey) and select Schedule.
4. Check the Use above setting when roaming box.
5. Press OK .
An Alert Tells Me That ActiveSync Encountered a Problem on the Server
There is a temporary problem with the server or the server may be temporarily
overloaded. Try again later, and if the problem persists, contact your system
administrator.
To Next Page
Loading...
