Panasonic 616 - Page 52

S-DBS Frogramming Instnxtions
Section 400
v1.0
Issue 1 July 1990
HOW TO PROGRAM
Following is an example of how to program using the system’s
DATE feature:
a) Using the attendant’s telephone at extensions 10 and 11,
program the DATE as follows:
1. ON/OFF
2. PROG
3. # #
.
The system is now in Program Mode.
b) The date feature is a
T
tern-wide
program a change of ate.
setting, so press the PSD 1 key to
PSI) 1 - System setting
_.~ ._-.- --- - --
.--?SD.? - Tru_nk setting
- _._
PSI) 3 - Extension and ring setting
PSD 4 - Feature assignment
PSD 5 - Toll restriction setting
PSD6-TTYsetting
c) Enter the foIlowing PSD 1 address for the date:
0001 #
The system is now fn Date Set Mode. To set the date enter the Year
(YY), Month (MM) and Day (DD) as follows:
YYMMDD#
-.
c,
.
c-
.)
8