40
Setting Item
Factory Default Value
Description
6 AUTO FOCUS PRESET Select color camera focusing method when,
• [Init LPR Mode] is set to “DISABLE”
• [Init LPR Mode] is set to “ENABLE” and
[LPR Mode] is set to “PATROL”
• a recording trigger starts recording when
[Init LPR Mode] is set to “ENABLE” and
[LPR Mode] is set to “LPR”
Setting :
A
UTO (set to auto focus when zoom
ratio has been changed.),
PRESET
(When the zoom is 3x or below, the
camera is focused at a distance of
about 15 m (50 feet). Subsequent
zooming will engage auto focus.),
DISABLE
(Focus is locked at a distance
of about 40 m (130 feet) and
auto focus is disabled.)
Init LPR Mode DISABLE LPR (License Plate Recognition) function
switching
Setting :
ENABLE (LPR function is on),
DISABLE (LPR function is off and [LPR
Mode] switches to “PATROL”.)
Setup
(continued)
To Next Page
Loading...
