Panasonic AG-HMC150P/AN - PC EVR software (VVS0070); Required tools and equipment for PC EVR software; Connection

INF-13
5. PC EVR software (VVS0070)
5-1. Required tools and equipment for PC EVR software
When the PC EVR software is used, the following tools are required.
NAME Part Number Pcs. Remark
PC EVR software VVS0070 1
Download from the Global Service WEB site.
Measuring board VFK1988 1
Extension cable VFK1989 1
DC cable K2GJ2DC00002 or VJA1128 1 For Measuring board
DC cable K2GJ2DZ00022 1 For Camera Recorder
DE-A35BA (For P model)
DE-A35CA
(For E,EN and ER model)
DE-A35DA (For MC model)
AC Adaptor
DE-A35EA (For AN model)
2 For Camera Recorder and Measuring board
9pin RS232C cross cable --- 1
Personal Computer --- 1
*NOTE:
*OS: WINDOWS XP SP2
5-2. Connection
1. Unless otherwise specified, set the switches on the Measuring Board as shown in the table below.
NAME SETTING POSITION
SW5 CROSS
SW6 D-SUB
SW7 NORMAL
SW8
SYS
SW31 NORMAL
SW32 NORMAL
SW41 ON
SW5
SW6
SW7
SW8
SW31
SW32
SW41