INF-6
4. Service menu
This model has DIAGNOSTIC and ADJUST menu as service menu besides the setup menu.
< How to open the DIAGNOSTIC and ADJUST menu >
Press the button in order of “RESET/TC SET” button → “STOP” button → “MODE CHK” button → “MENU”
button, DIAGNOSTIC and the ADJUST menu can be displayed in addition to a setup menus.
Tilt the OPERATION lever in the ▲▼ direction to select the “DIAGNSTICS MENU” or “ADJUST MENU”, and
press the OPERATION lever (or tilt ► direction) to open the each menu.
Note: PB mode can not be display the menu
CAM MENU 3/3
OTHER FUNCTIONS
DIAGNOSTICS MENU
ADJUST MENU
SETUP ENTER EXIT
MENU
The DIAGNOSTICS menu and the ADJUST menu is
displayed on the third page.
MENU button
COUNTER-RESET button
OPERATION lever
DISP/MODE CHK button
To Next Page
Loading...
