Panasonic AG-HMC150P/AN - Write EEPROM data from PC to Camera-Recorder

INF-35
7-2. Write EEPROM data from PC to Camera-Recorder
You can return the Camera-Recorder to the condition before board exchanged by writing EEPROM data to new
board, which has been saved before board exchanged.
7-2-1. Write data of Camera EEPROM
1. This camera recorder is set to CAM mode.
2. Select “CAM(C
)” section after start up the PC EVR software, and click “OK” button.
3. Select “Open Image File(O
)” in “File(F)” menu, the screen for selecting the file to be written will appear.
4. Click “Open(O)” button in the Open screen and reading starts.
5. Select “EEPROM Write(W
)” in “File(F)” menu, following message will appear.
When “Cancel(C
)” button is clicked, writing EEPROM data is canceled.
When “OK” button is clicked, the writing starts.