INF-45
9-2-6. ZOOM MOTOR Ass’y
9-2-7. ZOOM SW Ass’y
When ZOOM SW P.C.Board is replaced, it requires same operation.
9-2-8. R SIDE P.C.Board
Set the Internal clock`s date and time.
Refer to item “Setting the calendar” of operation instructions and item “6-3-3. Setup of the Date and
Time of the internal clock” (page INF-26)for the setting method
Replace the R SIDE P.C.Board.
Overall Check
Overall Check
CAMERA Adjustment is required.
Regarding required adjustment items, refer to item “9-3-1. CAMERA Adjustment” (page INF-46).
Replace the Zoom SW Ass’y.
Overall Check
CAMERA Adjustment is required.
Regarding required adjustment items, refer to item “9-3-1. CAMERA Adjustment” (page INF-46).
Replace the ZOOM MOTOR Ass’y.
Reset the operation number of times of Zoom Motor.
Refer to item item “5-4-5. Display of ZOOM MOTOR operation number of times(CAM(C)
section)” (page INF-20) for the reseting method.
To Next Page
Loading...
