Panasonic AG-HMC150P/AN - Write UID Data

INF-25
3. Clicking “Execute(E
)” button, a message “TURN POWER OFF” appears on LCD display. Turn power off this
camera recorder.
NOTE: When the message of “TURN POWER OFF" is not displayed, the destination setting is not completed.
4. Turn power ON of this camera recorder and open the DIAGNOSTIC menu.
5. Confirm that the MODEL NO is displayed as follows.
Set Destination MODEL NO
P HMC150P
AN HMC150AN
EN HMC152EN
ER HMC154ER
MC HMC153MC
6-3-2. Write UID data
1. Select “Write New UID(E)” in “Videi Adjust(V)” menu or double-click “VIDEO Write New UID” on Adjustment
item.
2. Click “Write(W)” button, so that the new UID information is wrote to camera recorder automatically.
3. Turn the power OFF.
Select Write New-UID