INF-29
7. Save and write EEPROM data
< PREPARATION >
When CAM and SYS EEPROM data save and write, the PC EVR software (VVS0070) is used. Please connect the
tools and set up the PC EVR software follow the item “5. PC EVR software (VVS0070)”.
When XP EEPROM data save and write, the PC EVR software (VVS0069) is used. Please connect the tools and
set up the PC EVR software follow the item “6. PC EVR software (VVS0069)”.
7-1. Save data of EEPROM data of Camera-Recorder to PC
7-1-1. Save data of Camera EEPROM
1. This camera recorder is set to CAM mode.
2. Select “CAM(C
)” section after start up the PC EVR software, and click “OK” button.
3. Select “Option” in “Setting(S
)” menu and select “EEPROM : 4 byte read / write mode” on Option screen.
4. Select “0000-0FFF” on Device View screen as follows.
To Next Page
Loading...
