INF-23
6. Select the model in “Select Model” box and click “Start(S
)” button on Start Communication screen.
7. When you backup the EEPROM data, click “A
rm” button. (Go to step 8) When you do not backup the
EEPROM data, click “N
ext” button. (Go to step 10)
8. When the “A
rm” button is clicked, Input file name screen appears to saving data. After confirming the file
name, click “Save” button on Input file name screen. While saving data, progress bar is displayed. When
“OK(O
)” button is displayed, data saving is complete.
9. Clicking “OK(O
)” button, the screen of Step 7 is displayed again. Click “Next” button to open the main screen.
10. Main screen is displayed.
To Next Page
Loading...
